6-speed manual gearbox 02Q Volkswagen R GmbH — Renewing seal between gearbox and bevel box with bevel box removed — VW

🧭 Before you start

Fits: VW Golf V / Jetta (1K, 2003–2009), VW Golf VI (5K, 2008–2013); platform code 137

🔧 Engine codes this applies to

📐 80 workshop diagrams for BYD

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Remove bevel box .
2. Remove bevel box .
3. Remove bevel box .
4. Lever oil seal out using extractor tool T20143/1 or extractor tool T20143/2.
5. Fill half of space between sealing lip and dust lip (arrow) with sealing greaseG 052 128 A1.

6. Lightly oil outer circumference of new oil seal.
7. Drive in seal to stop.
8. Install bevel box .
9. Install bevel box .
10. Install bevel box .
11. Check gear oil in bevel box .
12. Check gear oil in gearbox .

Other VW procedures

• 6-speed manual gearbox 02Q Volkswagen R GmbH — Renewing seal between gearbox and bevel box
• Checking vacuum supply of fuel system diagnostic pump V144
• Removing and installing air filter element – VW Touareg II
• Draining coolant
• Checking oil pressure and oil pressure switch (1-pin oil pressure switch)
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures