6-speed manual gearbox 02Q Volkswagen R GmbH — Bleeding clutch mechanism — VW

🧭 Before you start

Fits: VW Golf V / Jetta (1K, 2003–2009), VW Golf VI (5K, 2008–2013); platform code 137

🔧 Engine codes this applies to

📋 Procedure

1. Remove air filter with engine cover if it is located close to the battery 24Repairing injection system.
2. Connect brake filling and bleeder unitVAS 5234 or brake filling and bleeder unitV.A.G 1869.
3. Connect bleeder hose to collector bottle of brake bleeding equipment.
4. Connect bleeder hose (A) to bleeder (arrow).
5. Pressurise system to 2 bar.

6. Open bleeder valve by about 1/4 turn.
7. Move clutch pedal 15 to 20 times quickly by hand from stop to stop.
8. Close bleeder valve and switch off brake bleeding equipment.
9. After completing bleeding procedure, when the pressure of 2 bar is released, operate clutch pedal ten more times by foot.
10. If removed, install air filter with engine cover 24Repairing injection system.

Other VW procedures

• Torque settings, assembly mountings and gearbox to engine (3.2 l and 3.6 l engine) · 2 torque figures
• 6-speed dual clutch gearbox 02E Volkswagen R GmbH — Removing and installing bevel box , Passat 2011 ► with 3.6 l V6 engine
• Removing and installing coolant pipes – VW 2.0
• 6-speed dual clutch gearbox 02E Volkswagen R GmbH — Removing and installing bevel box, Golf 2009 ► with 2.0 l engine
• Installing and adjusting clutch
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures