Gearbox removal & installation: Peugeot 5008 MCM (DV6TED4)
Step-by-step gearbox removal & installation for the Peugeot 5008 MCM (DV6TED4): 19 steps. What to remove, in what order, and what to check after.
Workshop procedure for PEUGEOT — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.6, HDIF
🔧 Engine codes this applies to
📋 Procedure
- Starter motor
- Remove the engine together with the gearbox
- Disconnect the oxygen sensor connection
- Remove the catalytic converter together with the diesel particulate filter
- Disconnect the wiring loom bracket
- Remove the bolt
- Remove the starter motor cables
- Remove the starter motor
- Fit a lifting eye to the gearbox
- Use a hoist to support the gearbox
- Remove the engine/gearbox attaching bolts
- Separate the gearbox from the engine
- Remove the gearbox
Other PEUGEOT procedures
- Citroen C4 Picasso MCP DV6C gearbox removal & installation
- C3 - DV6TED4: Additive tank renewal
- Peugeot 407 DV6TED4 DPF removal
- C5(X7) - DV6TED4
- Citroen C5 DV6TED4 DPF removal
- Peugeot 407 and EW10J4/EW7J4 timing belt replacement
- Peugeot 306 DW8/DW8B timing belt replacement
- 406 XUD9 turbo
- Peugeot EP6CDTX timing chain replacement
- 1007 - DV6TED4 - BE4R gearbox removal installation
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.