C3 - DV6TED4: Additive tank renewal — CITROEN

🧭 Before you start

Fits: platform codes 1.6, HDIF, 16V

• Renewed: additive reservoir note

Don't miss

• Caution! The temperature of the engine and exhaust will increase significantly
• Caution! Note the additive hazard warnings
• Caution! Do not damage the flexible pipe
• Do not re-use the drained fluid or fluid from opened containers
• The flexible reservoir must fit flush with the additive tank housing

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Caution! The temperature of the engine and exhaust will increase significantly
2. Caution! Note the additive hazard warnings
3. Check the tightness of the turbocharger hoses
4. Select the highest suspension position
5. Disconnect the mounting clips

6. Start the engine
7. Connect the diagnostic tool
8. Remove the bolts shown
9. Disconnect the pipe(s)
10. Activate the diesel particulate filter regeneration function
11. Move the heat shield
12. Caution! Do not damage the flexible pipe
13. Disconnect the pipe
14. Engine running at idle speed
15. Exhaust clamp:

Installation and checks

16. Tighten the clamp(s)
17. Note: Do not re-use the drained fluid or fluid from opened containers
18. Renew the additive reservoir
19. Note: The flexible reservoir must fit flush with the additive tank housing
20. Refit the additive tank
21. Installation is in the reverse order of removal
22. Run the engine at idle speed
23. Use the diagnostic tool
24. Reprogram the additive pump

Other CITROEN procedures

• 3008 - MCM - DV6TED4; 308 - DV6C
• Peugeot 3008, 5008 DV6TED4 clutch replacement
• Peugeot DV6TED4 gearbox removal & installation
• Peugeot 308 MCP DV6TED4 gearbox removal & installation
• Citroen Xsara Picasso DV6TED4 timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
• Citroen Xantia turbo timing belt replacement
• Citroen EW10J4/EW7J4 timing belt replacement