207/107 DV4TD ancil belt — PEUGEOT
207/107 DV4TD ancil belt on Peugeot: 12 steps, engines DV4TD(8HZ). What to remove, in what order, and what to check after.
Workshop procedure for PEUGEOT — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.4, HDI
- Renewed: ancillary drive belt
🔧 Engine codes this applies to
📋 Procedure
- Disconnect the battery
- Before disconnecting the battery cable, check the audio system security code
- Remove the front right wheel
- Remove the right wheel arch liner
- Check the drive belt tension
- Renew the ancillary drive belt if the mark is at:
- Turn the tensioner body
- Use a special tool:
- Lock the tensioner
- Use a special tool:
- Remove the drive belt
Other PEUGEOT procedures
- Peugeot 307 DV4TD timing belt replacement
- 1007 1.4 HDi (DV4TD)
- 207 DV4TD
- Citroen C3 DV4TD timing belt replacement
- Peugeot 206 DV4TD timing belt replacement
- Peugeot 407 and EW10J4/EW7J4 timing belt replacement
- Peugeot 306 DW8/DW8B timing belt replacement
- 406 XUD9 turbo
- Peugeot EP6CDTX timing chain replacement
- 1007 - DV6TED4 - BE4R gearbox removal installation
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.