DW8 drivebelt — CITROEN

🧭 Before you start

Fits: platform codes 1.9, D

• Timing position: the crankshaft or camshaft is set and locked during this job
• Special tools named: locking pin

🔧 Engine codes this applies to

📋 Procedure

1. Check the tension with a tension gauge
2. Vehicles without air conditioning:
3. Loosen the bolts
4. Fit the tension gauge
5. The tension is set if the tension gauge indicates a value between:

6. Vehicles with power steering:
7. The tension is set if the tension gauge indicates a value between:
8. Vehicles with air conditioning:
9. New belt:
10. Pre-tension the belt until the tension gauge indicates a value between:
11. Run the engine
12. Wait for 10 seconds
13. Stop the engine
14. The tension is set if the tension gauge indicates a value between:
15. Used belt:
16. Measure the tension before removal
17. Vehicles with power steering and air conditioning:
18. Lock the tensioner; use a locking pin

Other CITROEN procedures

• Peugeot 306 DW8/DW8B timing belt replacement
• Citroen Berlingo drive DW8/DW8B auxiliary belt replacement
• Citroen Xsara 1.9D DW8/DW8B timing belt replacement
• Peugeot 206 1.9D DW8/DW8B timing belt replacement
• Peugeot Expert 1.9D DW8/DW8B timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
• Citroen Xantia turbo timing belt replacement
• Citroen EW10J4/EW7J4 timing belt replacement