C8,C-Crosser (Lucas brake system) — CITROEN

🧭 Before you start

• Opens: brake fluid

Don't miss

• Bleeding must be done with a diagnostic tool

🔧 Engine codes this applies to

📋 Procedure

1. Raise the vehicle
2. The fluid level should be between MIN and MAX
3. Connect the brake circuit bleeding device to the master cylinder
4. Fill the reservoir
5. Pressurise the system

6. Pressure:
7. Close the circuit
8. Follow the procedure:
9. Open the rear right brake caliper bleed screw
10. Until no bubbles come out
11. Close the bleed screw
12. Collect the escaping fluid in a container
13. Repeat the procedure
14. Rear, left
15. Front, right
16. Front, left
17. Close the circuit
18. Disconnect the brake fluid replacement unit
19. Check the operation of the brake pedal
20. After repairs:
21. Bleed the secondary brake circuit
22. Bleeding must be done with a diagnostic tool
23. Brake fluid:
24. Top up if necessary
25. If required:
26. Bleed the brake system
27. Repeat the procedure

Other CITROEN procedures

• C8,C-Crosser (Brembo brake system)
• 4008 2.0i 4B11
• Peugeot 4007 2.4 4B12 timing chain replacement
• Citroen C-Crosser 2.4 4B12 timing chain replacement
• Citroen C-Crosser W5MBB 2.4 gearbox removal & installation
• Citroen DW10TD timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
• Citroen Xantia turbo timing belt replacement
• Citroen EW10J4/EW7J4 timing belt replacement