4008 2.0i 4B11 — PEUGEOT
4008 2.0i 4B11 on Peugeot: 14 steps, engines 4B11(AFZ). What to remove, in what order, and what to check after.
Workshop procedure for PEUGEOT — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code 2.0I
- Opens: gearbox oil
Don't miss
- Ensure that the gearbox is not in limp home mode
🔧 Engine codes this applies to
📋 Procedure
- Ensure the vehicle is level
- Note: Ensure that the gearbox is not in limp home mode
- Gear lever in positions 'N' or 'P'
- When the fluid temperature reaches 70 - 80 °C
- Check that the fluid level is between the upper and lower hot marks
- Fill the gearbox
- Note: Fill through the dipstick tube
- Reset the oil wear counter
Other PEUGEOT procedures
- Peugeot 407 and EW10J4/EW7J4 timing belt replacement
- Peugeot 306 DW8/DW8B timing belt replacement
- 406 XUD9 turbo
- Peugeot EP6CDTX timing chain replacement
- 1007 - DV6TED4 - BE4R gearbox removal installation
- Peugeot 307 EW10A timing belt replacement
- Peugeot 807 EW10A timing belt replacement
- Peugeot 807 EW10J4 timing belt replacement
- Peugeot Partner 1.6 TU5JP4/TU5JP4B timing belt replacement
- Peugeot Bipper DV4TED timing belt replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.