G13, G13B, G13BA — SUZUKI

🧭 Before you start

• Timing position: the crankshaft or camshaft is set and locked during this job

Don't miss

• Align the camshaft gearwheel timing mark with the mark on the rear cover

🔧 Engine codes this applies to

📋 Procedure

1. Check the timing marks
2. Unless otherwise advised by the manufacturer, the following procedures are recommended:
3. Fit the timing belt
4. Loosen the tensioner
5. Check the tensioner and idler pulleys; renew if necessary

6. Tighten the tensioner
7. Check the timing marks again
8. Align the camshaft gearwheel timing mark with the mark on the rear cover
9. Align the crankshaft timing marks
10. Loosen the tensioner
11. Turn the tensioner backwards
12. Tighten the tensioner
13. Remove the timing belt

Other SUZUKI procedures

• Suzuki Grand Vitara 2.5 H25A timing chain replacement
• Suzuki Liana, Jimny No VVT M13A/M16A timing chain replacement
• Suzuki Liana Chain
• Suzuki Grand Vitara 1.6 M16A timing chain replacement
• Suzuki Grand Vitara 2.0 J20A timing chain replacement
• Suzuki Swift 1.2 DDiS D13A/Z13DT timing chain replacement
• Suzuki SX4 VVT 1.6 M16A timing chain replacement
• Suzuki SX4 no VVT 1.5 M15A timing chain replacement
• Wagon R (M13/G13/Z13DT) clutch
• Wagon R (Z12XEP) clutch