Wagon R (M13/G13/Z13DT) clutch — SUZUKI

🧭 Before you start

Fits: platform codes 1.3, 16V, |, VVT, DDIS

• Timing position: the crankshaft or camshaft is set and locked during this job
• Special tools named: locking tool

Don't miss

• We recommend that the clutch release bearing should always be renewed

🔧 Engine codes this applies to

📐 2 workshop diagrams for G13BB

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Clutch alignment tool:
2. Flywheel locking tool:
3. Fit the flywheel locking tool
4. We recommend that the clutch release bearing should always be renewed
5. Check the clutch release bearing guide tube and fork; renew if necessary

6. Remove the clutch release fork with the clutch release bearing
7. Check the clutch housing for leaks; check the crankshaft end seal thoroughly
8. Refit the gearbox
9. Check the flywheel friction surface for condition and wear
10. Loosen the bolts 1 turn at a time, in a criss-cross pattern, to prevent damage
11. Remove the clutch plate
12. Remove the flywheel locking tool
13. Remove the clutch alignment tool

Other SUZUKI procedures

• Suzuki Wagon R RB 1.3 G13BB timing belt replacement
• Suzuki Liana Chain
• Suzuki Wagon R 1.3 M13A timing chain replacement
• Suzuki Ignis, New Ignis, VVT M13A timing chain replacement
• Suzuki 1.3 M13A gearbox removal & installation
• Suzuki Grand Vitara 2.5 H25A timing chain replacement
• Suzuki Liana, Jimny No VVT M13A/M16A timing chain replacement
• Suzuki Grand Vitara 1.6 M16A timing chain replacement
• Suzuki Grand Vitara 2.0 J20A timing chain replacement
• Suzuki Swift 1.2 DDiS D13A/Z13DT timing chain replacement