Alto G10B — SUZUKI

🧭 Before you start

Fits: platform codes 1.0I, 8V

• Timing position: the crankshaft or camshaft is set and locked during this job

Don't miss

• Always check the timing marks before timing belt removal
• Always fit a new timing belt after removal
• Never turn the engine in the direction opposite to that of normal operation

🔧 Engine codes this applies to

📐 3 workshop diagrams for G10B

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Always check the timing marks before timing belt removal
2. Unless otherwise advised by the manufacturer, the following procedures are recommended:
3. Always fit a new timing belt after removal
4. Remove the crankshaft pulley
5. Crankshaft pulley centre bolt:

6. Never turn the engine in the direction opposite to that of normal operation
7. Check the belt(s) for cracks, fraying, wear and oil contamination
8. Tighten the tensioner pulley nut
9. Note: Avoid bending, torsion or traction
10. Refit all other parts in the reverse order of removal

Other SUZUKI procedures

• Suzuki Grand Vitara 2.5 H25A timing chain replacement
• Suzuki Liana, Jimny No VVT M13A/M16A timing chain replacement
• Suzuki Liana Chain
• Suzuki Grand Vitara 1.6 M16A timing chain replacement
• Suzuki Grand Vitara 2.0 J20A timing chain replacement
• Grand Vitara my05 F9Q
• Suzuki Swift M13A/M15A gearbox removal & installation
• Alto G10BB
• Suzuki SX4 D20AA gearbox removal & installation
• Suzuki SX4 1.6 9HX timing belt replacement