Timing belt replacement: 213 S/SE EV2 1984 - 1990 — ROVER

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Coolant pump renewal is recommended after timing belt removal
2. Never turn the engine in the direction opposite to that of normal operation
3. Disconnect the battery
4. Remove the alternator belt
5. Note: Avoid bending, torsion or traction

6. Remove the crankshaft pulley
7. Remove the timing belt lower cover
8. Loosen the tensioner
9. Turn the tensioner wheel away from the timing belt
10. Remove the timing belt

Installation and checks

11. Fit the timing belt
12. Turn the engine anti-clockwise; 3 teeth at the camshaft gearwheel
13. Refit all other parts in the reverse order of removal
14. Note: The engine must be cold before timing belt adjustment
15. Tighten the tensioner

Other ROVER procedures

• 75 KV6 Timing
• D series timing 97.5 on
• 600 L series timing
• 200, 25, Streetwise L-series FIP belt
• 600 L-series FIP belt
• 200 20T2R / 20T2N-motor uit / in (L)
• 400 20T2R / 20T2N-motor uit / in (L)
• 200 20T2R / 20T2N-motor kop uit / in (L)
• 216 S/SE/SX 16HD/E 1985 - 1989