TorqFix

Master II (G9U-632)/ Trafic II (G9U-630, M9R) with FAP — RENAULT

Master II (G9U-632)/ Trafic II (G9U-630, M9R) with FAP on Renault: 17 steps, engines F9Q-774(W7), G9T-750(F7), G9U-630(B6), G9U-632(B6).

Workshop procedure for RENAULT — the exact step sequence and torque figures, straight from real workshop data.

17 steps 16 engine codes

🧭 Before you start

Fits: platform codes 1.9, DCI, 80, |, 2.0, 115, (B30), FAP, 90, 2.2, 2.5, 100, 120

📋 Procedure

  1. Note:
  2. Time limit: 1 minute
  3. Check that the accelerator pedal is fully released
  4. Turn the ignition on
  5. Press and hold the accelerator pedal
F9Q-774(W7)? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Press and release the brake pedal 3 times
  2. Release both pedals at the same time
  3. Wait for 10 seconds
  4. The maintenance key disappears
  5. Turn the ignition off
  6. The system is reset
  7. Procedure in case the service reset is not successful
  8. Turn the ignition off and on
  9. Within 3 seconds
  10. Repeat the procedure

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.