F9Q dCi ancil belt (timing belt driven waterpump) — RENAULT

🧭 Before you start

Fits: platform codes 1.9, DCI, |, 100, 110, 110/125/130, FAP, 115/130, 120, 4X4, 80, 95, DTI, RX4

Don't miss

• Ensure the belt is level with the front of the pulley
• If the mark on the special tool is within the specified area, the tension is correct

🔧 Engine codes this applies to

📋 Procedure

1. with automatic tensioner
2. Loosen the bolts while holding the bracket in place
3. Note: Ensure the belt is level with the front of the pulley
4. Tension the belt
5. The tension is set when the tension gauge indicates a value of:

6. Vehicles with air conditioning:
7. Vehicles with power steering:
8. Vehicles with power steering and air conditioning:
9. with automatic tensioner
10. Check the tensioner
11. Fit the special tool
12. If the mark on the special tool is within the specified area, the tension is correct
13. If the tension is not set correctly:
14. Check the tensioner and/or the belt for correct fitting

Other RENAULT procedures

• Renault Laguna V6 timing chain replacement
• Renault G8T-714/G8T-716 timing belt replacement
• Renault Laguna II F5R-700 timing belt replacement
• G8T version with cam belt only (Laguna I) refit + multi tiff included MB 25-03-05 Dialogis
• Renault G8T-706 timing belt replacement
• Renault Laguna II with VVT K4M-716 timing belt replacement
• Renault 1.5 dCi timing belt replacement
• Renault Kangoo2 1.5 dCi K9K-808 timing belt replacement
• Renault Kangoo2 MR417 1.5 dCi timing belt replacement
• Renault Kangoo II WO VVT MR417 timing belt replacement