Ancillary belt D4F D4D — RENAULT

🧭 Before you start

Fits: platform codes 1.0, 16V, |, 1.2, (48/55, KW), 75, E85, TCE, 100

Don't miss

• The ancillary drive belt can only be fitted once. When removal is required, always fit a new belt
• The engine must be cold

🔧 Engine codes this applies to

📋 Procedure

1. Note: The ancillary drive belt can only be fitted once. When removal is required, always fit a new belt
2. Note: The engine must be cold
3. Check the tension with a tension gauge
4. Tension the belt
5. The tension is set when the tension gauge indicates a value of:

6. Vehicles with power steering:
7. Vehicles with power steering and air conditioning:
8. Vehicles with air conditioning:
9. Alternator:
10. Use a bolt
11. Vehicles without power steering and air conditioning:

Other RENAULT procedures

• Renault Laguna V6 timing chain replacement
• Renault G8T-714/G8T-716 timing belt replacement
• Renault Laguna II F5R-700 timing belt replacement
• G8T version with cam belt only (Laguna I) refit + multi tiff included MB 25-03-05 Dialogis
• Renault G8T-706 timing belt replacement
• Renault G8T-740 auxiliary belt replacement
• Renault non type specific timing chain replacement
• Renault Modus 1.5 dCi auxiliary belt replacement
• Renault Twingo2 1.5 dCi K9K-740 auxiliary belt replacement
• Renault non type specific 2.0 dCi timing chain replacement