TorqFix

XUD ribbed belt — CITROEN

XUD ribbed belt on Citroen: 13 steps, engines XUD7(A9A), XUD9A(D9B), XUD9BSD(DHV), XUD9BTF(DHX). What to remove, in what order, and what to check after.

Workshop procedure for CITROEN — the exact step sequence and torque figures, straight from real workshop data.

13 steps 8 engine codes

🧭 Before you start

Fits: platform codes 1.8, D, |, 1.9, SD, TD, TURBO, 2.1, 12V

🔧 Engine codes this applies to

XUD7(A9A)XUD9A(D9B)XUD9BSD(DHV)XUD9BTF(DHX)XUD9TE(DHY)XUD9TF(D8B)XUD9TFL(D8B)XUD9Y(DJY)

📐 12 workshop diagrams for XUD7(A9A)

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

XUD ribbed belt — XUD7(A9A) · diagram 1
XUD ribbed belt — XUD7(A9A) · diagram 2
XUD ribbed belt — XUD7(A9A) · diagram 3
XUD ribbed belt — XUD7(A9A) · diagram 4
XUD ribbed belt — XUD7(A9A) · diagram 5
XUD ribbed belt — XUD7(A9A) · diagram 6
XUD ribbed belt — XUD7(A9A) · diagram 7
XUD ribbed belt — XUD7(A9A) · diagram 8
+ 4 more diagrams
🔒 12 workshop diagrams for this job Ask about your Citroen XUD7(A9A) — free or sign up free to see the drawings

📋 Procedure

  1. Vehicles without air conditioning:
  2. Check the tension with a tension gauge
  3. Vehicles with air conditioning:
  4. Check the tension with a tension gauge
  5. Vehicles with power steering and air conditioning:
XUD7(A9A)? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Push the tensioner pulley away from the timing belt
  2. Lock the tensioner
  3. Use a special tool:
  4. Remove the drive belt
  5. Fit the drive belt
  6. Use a square spanner to unlock the tensioner
  7. Tighten the tensioner
Workshop diagrams

Ask TorqFix about your Citroen XUD7(A9A) — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.

Ask about your Citroen XUD7(A9A) — free → or sign up free to see the drawings

Other CITROEN procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.