Jumper III P22DTE+ (without air conditioning) — CITROEN

🧭 Before you start

Don't miss

• Ensure the belt is correctly positioned in the grooves
• Use a wrench to counterhold
• Before removing, mark the direction of rotation

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Raise the vehicle
2. Remove the engine lower cover
3. Remove the front right splash guard
4. Remove the front right wheel
5. Fit the special tool

6. Engage first gear
7. Remove one bolt from the crankshaft drive pulley
8. Select neutral
9. Fit the special tool
10. Check the crankshaft pulley
11. Turn the crankshaft clockwise
12. Engage first gear
13. Remove the special tool
14. Remove the bolts
15. Loosen the bolt
16. Remove the ancillary drive belt
17. Note: Before removing, mark the direction of rotation

Installation and checks

18. Crankshaft turning tool:
19. Counterhold tool:
20. Refit the ancillary drive belt
21. Ensure the belt is correctly positioned in the grooves
22. Turn the power steering pump pulley clockwise
23. Note: Use a wrench to counterhold
24. Refit the bolts
25. Tighten the bolts:
26. Remove the wrench
27. Tighten the bolt
28. Remove the special tool
29. Refit the front right wheel
30. Refit the front right splash guard
31. Refit the engine lower cover
32. Reconnect the battery

Other CITROEN procedures

• Citroen Jumper III P22DTE/P22DTE+ timing chain replacement
• Jumper III P22DTE+ (with air conditioning)
• Citroen DW10TD timing belt replacement
• Citroen DW10TD timing belt replacement
• Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
• Citroen Xantia turbo timing belt replacement
• Citroen EW10J4/EW7J4 timing belt replacement
• Citroen Nemo 1.2 199A9000/F13DTE5 clutch replacement
• Citroen 1997 timing belt replacement
• C2, C3 1.6 16V TU5JP4