Removing and installing wiper mounting - vehicles up to 10.2004 — AUDI
Removing and installing wiper mounting - vehicles up to 10.2004 on Audi: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A4 B6/B7 (8E)
📋 Procedure
- Lift wiper arm off windscreen.
- Press release button at linkage (arrow).
- Detach wiper blade (2) from wiper arm (1) downwards.
- Release the retaining lug on release button (arrow 1).
- Pivot the release button upwards.
- Pull release button out of wiper arm (arrow 2).
- Press the sides of wiper mounting (1) inwards (arrows).
- Remove wiper mounting from wiper arm (2).
- Press the spacer together at retaining lugs (1).
- Remove spacer from wiper arm (2).
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing three-point seat belt with belt tensioner (front)
- Removing rack for variable convertible roof compartment – Audi
- Removing and installing four-way lumber support - vehicles up to model year 2005
- Removing and installing remote release motor – Audi A6 C5 · 1 torque figures
- Removing and installing cover for rear wheel housing (Allroad)
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.