Removing and installing radiator fan 2V177 (front): Audi A6 C5 2.7 (AJK, APB, ARE, ASJ, …)

🧭 Before you start

Fits: Audi A6 C5 (4B)

Don't miss

• Fit all cable ties in the original positions when installing.

🔧 Engine codes this applies to

📐 20 workshop diagrams for AJK

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Release fasteners (arrows) and remove noise insulation.
2. Remove front bumper 63.
3. Move lock carrier to service position 50.
4. Remove cover (arrow) at power steering fluid reservoir.
5. Remove all electrical connectors from the bracket (arrows).

6. Unplug brown connector and move wiring to radiator fan 2V177 clear.
7. Unclip ambient temperature sensor G17.
8. Unclip cover for radiator fan and lift out upwards (arrows).
9. Remove bolts (1 … 3) and take out radiator fan. [Note: Fit all cable ties in the original positions when installing.]
10. Install lock carrier with attachments 50.
11. Install front bumper 63.
12. Install noise insulation 50.

Other AUDI procedures

• Checking clutch pedal switch F36 – Audi A6 C5
• Renewing oil retention valves – Audi A4 B5
• Checking Motronic current supply relay J271 on vehicles with engine code letters "“BES”"
• Removing and installing air filter element – Audi
• Checking function of variable valve timing – Audi A4 B5
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures