Removing and installing digital TV tuner, from model year 2012 onwards — AUDI

🧭 Before you start

Fits: Audi A5 Cabriolet (8F)

Don't miss

• Do NOT disconnect the hydraulic lines. — Swivel hydraulic pump into luggage compartment.

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Remove luggage compartment side trim (left-side) General body repairs, interior70Luggage compartment trim panels; Removing and installing luggage compartment side trim.
3. Release retainer at hydraulic pump and any electrical connectors that are in the way General body repairs, exterior61Convertible roof; Removing and installing hydraulic unit (hydraulic pump).
4. ⚠ Do NOT disconnect the hydraulic lines. — Swivel hydraulic pump into luggage compartment.
5. Unscrew nuts (1), (2), (3) and (4) on infotainment rack (6).

6. Pivot rack (6) into luggage compartment.
7. Release and unplug all connectors to radioR, TV tuner R78 and digital sound package control unit J525.
8. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
9. Remove rack from luggage compartment.
10. Unscrew bolts (arrows) at TV tuner R78(1).
11. Detach TV tuner R78(1) from rack (2).
12. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rear floor covering, single cab
• Removing and installing seat trims, Double Cab (with side airbag)
• Removing and installing seat trims, Double Cab (without side airbag)
• Removing and installing front backrest (without side airbag)
• Removing and installing cover and padding for right bench seat