Removing and installing seat trims, Double Cab (with side airbag) — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

📋 Procedure

1. Remove front seat .
2. Remove belt buckle .
3. Turn backrest adjusting wheel (3) until a detent can be seen from the rear. Use a torch if necessary.
4. Apply assembly tool3399 behind a detent of backrest adjusting wheel (3).
5. Lever assembly tool3399 outwards to detach backrest adjusting wheel (3) from seat (1).

6. Remove backrest adjusting wheel (3) with spacer ring (2).
7. Remove bolts (5) and remove adjustment lever (4).
8. Remove bolts (13) and remove left trim (6).
9. Remove bolts (14) and remove right trim (12).
10. Remove bolts (8) and (10) and remove compartment (7).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Adjusting selector lever cable – Audi A6 C5 · 2 torque figures
• Renewing valve stem oil seals (cylinder head removed) – Audi
• Oil pump and sump (bottom section) - exploded view · 3 torque figures
• Servicing seat longitudinal adjuster – Audi A6/A7 C7 · 1 torque figures
• Removing and installing 4/2-way valve with thermostat – Audi