Overview of fitting locations - hydraulic power steering (vehicles with 4-cylinder diesel engine, vehicles with/without dynamic steering) — AUDI

🧭 Before you start

Fits: Audi Q5 (8R, 2008–2017); platform code 83

Don't miss

• Note correct position of line when connecting. Markings (1) and (2) must be aligned.

📋 Procedure

1. Secure bracket (2) to body with bolts (1).
2. Secure reservoir (4) in bracket (2) with bolt (3).
3. Fit reservoir (insert lug (1) into recess in bracket (2)).
4. Attach return hose (1) to longitudinal member (left-side) using clip (2).
5. Insert suction hose (1) in clip (2) of pressure pipe (3).

6. Position hydraulic fluid cooler (1) on retainers (2) and then engage in retainers (3).
7. Bolt pressure line with nut (3) and rubber mounting (4) onto cross brace.
8. Note correct position of line when connecting. Markings (1) and (2) must be aligned.
9. Route pressure line (4) between connecting element (2) and engine mounting (3).
10. Screw retainer (5) to stud (1) with nut (6).
11. Secure retainer (1) of return line to front left of subframe (2).
12. Attach return line (4) with bracket (2) and bolt (1) to subframe (3).
13. Attach hoses (5) and (6) with clips (1) (2x) to ribbed sections (2) (2x).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing cylinder head cover (left-side) – Audi · 1 torque figures
• Removing cylinder head (right-side) – Audi A8 D2
• Checking oil pressure and oil pressure switch – Audi TT Mk1
• Adjusting commencement of injection – Audi 2.5 TDI · 3 torque figures
• Checking air mass meter G70 – Audi A6 C5