147 3.2 V6 C530.6 gearbox — ALFA ROMEO

🧭 Before you start

Fits: platform codes 3.2, V6, GTA

• Opens: brake fluid, gearbox oil

🔧 Engine codes this applies to

📐 19 workshop diagrams for 932A000

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

Preparation and removal

1. - Bleeding the hydraulic circuit
2. Remove the brake fluid reservoir cap
3. Connect the special tool to the reservoir
4. Remove the earth cable
5. Special tool:

6. Disconnect the battery
7. Remove the battery and tray
8. Remove the safety cap
9. Connect the bleed hose to the slave cylinder
10. Position the container lower than the clutch slave cylinder
11. Open the clutch master cylinder bleed valve
12. Remove the air filter together with the mass airflow meter
13. Remove the front wheels
14. Remove the engine lower cover
15. Remove both front wheel arch liners
16. Remove the bonnet lock
17. Remove the pre-catalytic outlet pipe
18. Disconnect the catalytic converter
19. Remove the exhaust manifold heat shield
20. Support the gearbox with a trolley jack
21. Remove the engine support
22. Disconnect the starter motor electrical connections
23. Remove the starter motor
24. Drain the gearbox oil
25. Collect the escaping fluid in a container
26. Disconnect the drive shaft from the gearbox
27. Remove the drive shaft centre bearing bracket
28. Remove the earth cable from the gearbox
29. Disconnect the slave cylinder
30. Without disconnecting the system, place the pump aside
31. Disconnect the gear selector cables from the gearbox
32. Remove the engine/gearbox attaching bolts
33. Hydraulic reservoir bleeder:

Installation and checks

34. Installation is in the reverse order of removal
35. Bleed the hydraulic system
36. Until no bubbles come out
37. Close the clutch master cylinder bleed valve
38. Refit the safety cap
39. Remove the special tool
40. Refit the battery tray
41. Refit the battery
42. Reconnect the battery
43. Check the brake fluid reservoir level
44. Lower the gearbox slightly
45. Remove the gearbox
46. Steel rim:
47. Alloy rim:

Other ALFA ROMEO procedures

• Alfa Romeo 159 1.9 JTS, 2.2 JTS timing chain replacement
• MiTo 1.4 Turbo MultiAir
• Alfa Romeo Giulietta 1.4 Turbo 120 timing belt replacement
• Alfa Romeo timing belt replacement
• 147 1.6 TS 77 kW C510 gearbox
• 147 1.9 JTD 8V C530 gearbox
• 147 1.9 JTD 16V C530.6 gearbox
• 147 2.0 TS C510 gearbox
• 147 1.6 TS 88 kW C510 gearbox
• Alfa Romeo 955A2000/955A7000 gearbox removal & installation