932A000 engine — Alfa Romeo 3.2 (3.2L)
3.2L · 250 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | 932 A.000 |
| Capacity | 3179 cc |
| Idle speed | 650 - 750 rpm |
| Oil pressure | 0.8 bar/rpm |
| Oil pressure | 4.5 / 4500 bar/rpm |
| Oil pressure | 4.5 / 4000 bar/rpm |
Engine (petrol)
| Fuel system (make and type) | BOSCH ME.7.3.2 |
| Number of cylinders | 6 |
| Firing order | 1 - 4 - 2 - 5 - 3 - 6 |
| Spark plugs (make and type) | NGK R PFR6B |
| CO exhaust gas | 0.5 % |
| Lambda | 0.97 – 1.03 |
| CO at fast-idle speed | < 0.3 % |
| Fuel system (make and type) | Bosch Motronic ME 7.3.1 |
| Spark plugs (make and type) | NGK PFR6B |
Cooling system
| Cap pressure | 0.98 bar |
| Thermostat opens at | 87 +/- 2 °C |
| Cap pressure | 1.08 bar |
| Thermostat opens at | 85 - 89 °C |
Electrical
| Battery | 65 Ah |
| Alternator | 85 A |
| Alternator | 100 A |
| Battery | 60 Ah |
| Alternator | 120 A |
Capacities
| Engine sump, incl. filter | 5.9 l |
| Manual transmission | C.530.6 |
| Gearbox refill | 2.0 l |
| Cooling system | 9.2 l |
| Air-conditioner refrigerant | 500 - 650 g |
| Air-conditioner compressor oil | 130 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 25 Nm |
| Cylinder head bolts — Stage 2 | 230 ° |
| Spark plugs | 25 - 34 Nm |
| Front hub | M24: |
| Rear hub | M24: 304 - 336 Nm |
| Wheel bolts | 88 - 108 Nm |
| Wheel bolts | 78-94 Nm |
Emissions
| Emission code | 70/220*2001/1A |
| Emission standard | Euro 3 |
| CO2 average | 287 g/km |
| CO | 0.610 g/km |
| HC | 0.064 g/km |
| NOx | 0.064 g/km |
| CO2 average | 293 g/km |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a 932A000 problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.