Removing and installing sliding sunroof seals on glass panel — VW
Removing and installing sliding sunroof seals on glass panel on VW: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code 138
Don't miss
- Bonding surface must be free of dust and grease.
📋 Procedure
- Remove glass panel for panorama tilting sunroof .
- Pull off damaged seal or damaged retaining strip.
- Remove existing adhesive residues with adhesive strip removerVAS 6349.
- Bonding surface must be free of dust and grease.
- Clean complete bonding area with cleaning solutionD 009 401 04.
- Now apply glass/paint primer D009 200 02 evenly in one stroke using applicatorD 009 500 25.
- Observe flash-off period.
- Pull protective film off adhesive tape, section by section.
- Press on seal or retaining strip.
- Press on seal or retaining strip evenly and all round twice using roller3356.
- Installing glass panel for panoramic tilting sunroof .
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Removing and installing entry and start authorisation control unit J518 · 1 torque figures
- Removing and installing right coolant pipe – VW Touareg I
- Removing and installing heater element (heater cup) – VW CBAC
- Removing and installing suspension link with mounting bracket (left side for vehicles with DSG or automatic gearboxes)
- Removing and installing boot
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.