Removing and installing lumbar support of electrically adjustable seat — VW

🧭 Before you start

Fits: VW CC (358, 2012–2017)

📋 Procedure

1. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
2. Remove seat .
3. Secure seat to seat repair standVAS 6136.
4. Remove front belt buckle .
5. Remove right trim on seat .

6. Remove left trim on seat .
7. Remove backrest .
8. Secure backrest to seat repair standVAS 6136.
9. Remove head restraint .
10. Remove backrest cover and cushion .
11. Remove front side airbag .
12. Disconnect wiring harnesses from drive motors (1) and (2).
13. Drill out rivet (3) on underside from rear.
14. Drill out the two rivets (4) on left side.
15. Drill out the two rivets (5) on right side.
16. Unhook lumbar support from mountings in backrest frame (arrows).
17. Detach components of lumbar support from backrest frame.
18. Install in reverse order of removal.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Repair method using glass-to-metal adhesive
• Removing and installing left luggage compartment trim (Estate)
• Removing and installing upper C-pillar trim – VW
• Repairing Climatronic - additional heat exchanger – VW
• Removing and installing alternator for 1.8 l, 2.0 l 4-cylinder petrol injection engines and 1.9 l 4-cylinder diesel engines 06.00 ▸