Removing and installing luggage compartment side trim panel — VW

🧭 Before you start

Fits: VW Touran II (5T, 2015–)

• Renewed: if necessary

📋 Procedure

1. Remove luggage compartment cover .
2. Remove luggage compartment floor from vehicle towards rear.
3. Fold rear seat backrests of 2nd row forwards.
4. Remove rear seat from 3rd row .
5. Detach sill trim strip in rear area

6. Remove D-pillar trim .
7. Remove lock carrier trim .
8. If fitted, remove luggage compartment floor bracket .
9. Unscrew bolt (4) of tie-down ring (3) and remove .
10. Unscrew bolts (5) and (8)
11. If fitted, unscrew bolts (2).
12. Detach luggage compartment side trim (1) from mountings in body using removal lever80 - 200.
13. If fitted, separate electrical connectors for inverter connection (6) and 12V socket (7).
14. Remove luggage compartment side trim (1). [Note: Before installing, check all fasteners for damage and renew if necessary.Remove any retaining clips left in body mountings using removal tool T40280, and fit them in luggage compartment side trim for installation.Following installation, ensure that luggage compartment side trim is positioned in rear lid seal beading.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing rear side airbag with igniter – VW CC · 1 torque figures
• Removing and installing front seat fan V268
• Removing and installing lumbar support of electrically adjustable seat
• Checking delivery pressure of fuel pump, engine codes CBAA, CBAB, CBBB, CBAC
• Removing and installing ESP sensor unit · 1 torque figures