Removing and installing front side window: VW Touran II

🧭 Before you start

Fits: VW Touran II (5T, 2015–)

📋 Procedure

1. Remove A-pillar trim General body repairs, interior70Trims, interior; Removing and installing A-pillar trim.
2. Turn foam section (4) to side slightly (arrow a).
3. Push cutting wire (3) under seal (2) of front side window (1)(arrow b).
4. Using awlV.A.G. 1474/2, pull out cutting wire (3) behind seal (2) upwards towards A-pillar (arrow d).
5. Lay cutting wire (3) at top behind seal (2) of front side window (1).

6. Secure ends of cutting cord with pull handlesV.A.G 1351/1(3).
7. Cut through adhesive bead with "“sawing”" motions (arrows) of pull handlesV.A.G 1351/1.
8. Preparing old undamaged window for glazing
9. Preparing new window for glazing .
10. Preparing body flange for glazing
11. Installation instructions
12. Minimum curing period
13. Insert front side window (1) with seal (2) between body flange and wing (arrow a).
14. Press in front side window (arrow b), secure with adhesive tape and close front door.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Checking ignition key lock – VW Sharan I / SEAT Alhambra
• Adjusting height of sunroof glass panel – VW · 1 torque figures
• Removing viscous coupling – VW Sharan I / SEAT Alhambra
• Removing and installing tensioner for poly V-belt (Golf, Eos, Scirocco)
• Renewing Hall sender oil seals – VW Phaeton 4.2 BGH/BGJ