Removing and installing charge air cooling pump V188, version 1 and 2 — VW

🧭 Before you start

Fits: VW Golf VII Variant (BA), VW Golf Sportsvan (AM1, 2014–2020), VW Golf VII (5G, 2012–2020), VW Touran II (5T, 2015–)

• Special tools named: 3094

Don't miss

• Place a cloth underneath to absorb escaping coolant.
• Secure all hose connections with hose clips meeting production standard Electronic Parts Catalogue.

🔧 Engine codes this applies to

📋 Procedure

1. Remove noise insulation General body repairs, exterior66Noise insulation; Assembly overview - noise insulation.
2. Release and unplug electrical connector (3). [Note: Place a cloth underneath to absorb escaping coolant.]
3. Clamp off coolant hoses with hose clips 3094.
4. Release hose clips (2) and detach coolant hoses.
5. Detach charge air cooling pump V188(item 1) from mounting (4).

6. Separate electrical connector (3). [Note: Place a cloth underneath to absorb escaping coolant.]
7. Clamp off coolant hoses with hose clips 3094.
8. Release hose clips (1) and detach coolant hoses.
9. Unscrew bolt (2), open securing strap, and remove charge air cooling pump V188.
10. Release and pull off connector.
11. Unscrew bolt for bracket.
12. Lay charge air cooling pump V188 to one side. [Note: Secure all hose connections with hose clips meeting production standard Electronic Parts Catalogue.]
13. Check coolant level .

Other VW procedures

• Removing and installing radiator, variant 3 radiator – VW
• Removing and installing rear section of reduction agent supply line
• Removing and installing charge air cooling pump V188, version 3
• Removing and installing gearbox mounting – VW Jetta VI
• Removing and installing tank for reducing agent – VW 2.0 TDI
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures