D 4162T DPF renewal — VOLVO

🧭 Before you start

Fits: platform codes D2, |, DRIVE

🔧 Engine codes this applies to

📐 19 workshop diagrams for D4162T

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

Preparation and removal

1. Remove the engine upper cover
2. Raise the vehicle
3. Remove the intercooler inlet hose
4. Use a special tool:
5. Remove the oxygen sensor

6. Heat shield(s):
7. Remove the catalytic converter heat shield(s)
8. Diesel particulate filter:
9. Remove the diesel particulate filter bolts
10. Exhaust pipe:
11. Remove the clamp

Installation and checks

12. Refit the oxygen sensor
13. Refit the intercooler inlet hose
14. Refit the lower rear engine cover
15. Refit the air inlet hose to the turbocharger
16. Follow the instructions on the screen of the diagnostic tool

Other VOLVO procedures

• S80, C30, V70 - D4162T DPF renewal
• Volvo C30 DV6 D4162T timing belt replacement
• Volvo S80, S60, V60 DV6 D4162T timing belt replacement
• Volvo V70, XC70 Dv6 D4162T timing belt replacement
• Volvo S40, V50, V40 D4162T timing belt replacement
• Volvo S80, V70 2.0 B4204S3/B4204S4 timing chain replacement
• Volvo B5244S gearbox removal & installation
• S40/V40 B4184S2 M5P/M56 clutch removal
• Volvo 1.6 TD D4164T timing chain replacement
• Volvo 2.0 TD timing chain replacement