Auxiliary belt replacement: Toyota Yaris 2011, Auris 2013 (1ND-TV)
Step-by-step auxiliary belt replacement for the Toyota Yaris 2011, Auris 2013 (1ND-TV): 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for TOYOTA — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.4, D-4D
🔧 Engine codes this applies to
📐 59 workshop diagrams for 1ND-TV
Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.
📋 Procedure
- Remove the engine upper cover(s)
- Remove the engine lower covers
- Turn the tensioner pulley anti-clockwise
- Fit the ancillary drive belt
- Remove the ancillary drive belt
- Release the tensioner
- Note: Release the tensioner slowly
- Refit all other parts in the reverse order of removal
Ask TorqFix about your Toyota 1ND-TV — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.
Ask about your Toyota 1ND-TV — free → or sign up free to see the drawingsOther TOYOTA procedures
- Yaris 2005 1ND-TV belt
- 1ND-TV belt deflection
- Toyota DPF initialization
- Toyota Corolla 2001 1ND-TV timing chain replacement
- Toyota Yaris 2011 1ND-TV gearbox removal & installation
- Toyota Avensis 1AZ-FE timing chain replacement
- Toyota 1AZ-FE timing chain replacement
- Toyota VVTi timing chain replacement
- Toyota Avensis 2003 &2001 1AZ-FE timing chain replacement
- Toyota Avensis 2003 1AZ-FSE timing chain replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.