1ND-TV belt deflection — TOYOTA
1ND-TV belt deflection on Toyota: 11 steps, engines 1ND-TV. What to remove, in what order, and what to check after.
Workshop procedure for TOYOTA — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.4, D-4D
- Timing position: the crankshaft or camshaft is set and locked during this job
- Special tools named: locking pin
🔧 Engine codes this applies to
📋 Procedure
- The tension is set at a deflection of:
- Turn the tensioner anti-clockwise
- Remove the locking pin
- Check that tension is applied to the belt
- Start the engine
- Check for correct operation
Other TOYOTA procedures
- Toyota Yaris 2011, Auris 2013 auxiliary belt replacement
- Toyota DPF initialization
- Toyota Corolla 2001 1ND-TV timing chain replacement
- Toyota Yaris 2011 1ND-TV gearbox removal & installation
- Toyota Yaris 2005 1ND-TV gearbox removal & installation
- Toyota Avensis 1AZ-FE timing chain replacement
- Toyota 1AZ-FE timing chain replacement
- Toyota VVTi timing chain replacement
- Toyota Avensis 2003 &2001 1AZ-FE timing chain replacement
- Toyota Avensis 2003 1AZ-FSE timing chain replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.