Auxiliary belt replacement: Ancillary belt K9K (NT6006A) — RENAULT

🧭 Before you start

Don't miss

• The engine must be cold
• Ensure the belt is level with the front of the pulley

🔧 Engine codes this applies to

📐 13 workshop diagrams for F9Q-680

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

Preparation and removal

1. Note: The engine must be cold
2. Remove the reinforcement brace
3. Engines with mechanical tensioner:
4. Remove the ancillary drive belt tensioner
5. Remove the ancillary drive belt

6. Remove the ancillary drive belt tensioner
7. Note: Use a new bolt

Installation and checks

8. Note: Ensure the belt is level with the front of the pulley
9. Fit the ancillary drive belt
10. Check the tension with a tension gauge
11. Fit the tensioning tool
12. Fit the tension gauge
13. Engines with mechanical tensioner:
14. Turn the engine 2 rotations by hand
15. The tension is set when the tension gauge indicates a value of:
16. Engines with automatic tensioner:
17. Fit the ancillary drive belt tensioner
18. Fit the ancillary drive belt
19. Turn the engine 2 rotations by hand
20. Check for correct fitting
21. All vehicles:
22. Refit the reinforcement brace
23. Refit the wheel arch liner
24. Refit the front right wheel
25. Refit the engine covers
26. Reconnect the battery
27. Lower the vehicle

Other RENAULT procedures

• Renault Laguna V6 timing chain replacement
• Renault G8T-714/G8T-716 timing belt replacement
• Renault Laguna II F5R-700 timing belt replacement
• G8T version with cam belt only (Laguna I) refit + multi tiff included MB 25-03-05 Dialogis
• Renault G8T-706 timing belt replacement
• Renault G8T-740 auxiliary belt replacement
• Renault non type specific timing chain replacement
• Renault Modus 1.5 dCi auxiliary belt replacement
• Renault Twingo2 1.5 dCi K9K-740 auxiliary belt replacement
• Renault non type specific 2.0 dCi timing chain replacement