Gearbox removal & installation: Opel Agila F12 (Z10XE, Z10XEP, Z12XE)

🧭 Before you start

Fits: platform codes 1.0, 12V

🔧 Engine codes this applies to

📋 Procedure

1. Disconnect the battery
2. Remove the coolant expansion tank and place it aside
3. Disconnect the speedometer cable from the gearbox
4. Disconnect the electrical wiring from the gearbox
5. Remove the gearbox electrical connections

6. Disconnect the gearbox earth cables
7. Remove the engine/gearbox upper attaching bolts
8. Use a hoist to support the engine
9. Raise the vehicle
10. Drain the gearbox fluid
11. Remove the front wheels
12. Remove the drive shafts
13. Remove the left-hand gearbox support
14. Remove the rear gearbox support
15. Fit a transmission jack to support the transmission
16. Remove the engine/gearbox lower attaching bolts
17. Separate the gearbox from the engine
18. Remove the gearbox

Other OPEL / VAUXHALL procedures

• Opel Corsa B timing chain replacement
• Corsa C Clutch F13 F17
• Corsa C F 13 F17 Gearbox
• agila Z10XE(P)
• Opel Corsa C P 1.0 Z10XE/Z10XEP auxiliary belt replacement
• Opel Corsa C 1.2 CDTI timing chain replacement
• Opel Astra G 2.2 DTI Y22DTR timing chain replacement
• Opel VectraC, Signum 2.8 Z28NEL timing chain replacement
• Opel Astra G 2003 2.0 DTI Y20DTH timing chain replacement
• Opel Astra G X Y 20DTL 2.0 DTI X20DTL timing chain replacement