TorqFix

Cylinder head removal & torque: Citroen Evasion turbo

Step-by-step cylinder head removal & torque for the Citroen Evasion turbo: 25 steps. What to remove, in what order, and what to check after.

Workshop procedure for CITROEN — the exact step sequence and torque figures, straight from real workshop data.

25 steps

🧭 Before you start

Fits: platform codes 2.0, 8V, TURBO, CT

📋 Procedure

  1. Cylinder head:
  2. Installation is in the reverse order of removal
  3. Remove the air filter
  4. Remove the crankcase breather
  5. Disconnect all the hoses from the cylinder head
CITROEN? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Remove all the wiring from the cylinder head
  2. Remove and disconnect as shown
  3. Disconnect the turbo connection from the inlet manifold
  4. Remove the inlet manifold
  5. Remove the ignition leads
  6. Remove the valve cover
  7. Remove the ancillary drive belt
  8. Remove the ancillary drive belt tensioner pulley
  9. Remove the timing belt
  10. Remove the cylinder head

Other CITROEN procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.