TorqFix

Berlingo, C5 my08 DV6 ancil (mech pow. steering) — CITROEN

Berlingo, C5 my08 DV6 ancil (mech pow. steering) on Citroen: 12 steps, engines DV4TED(8HS), DV6TED4(9HZ).

Workshop procedure for CITROEN — the exact step sequence and torque figures, straight from real workshop data.

12 steps 2 engine codes

🧭 Before you start

Fits: platform codes 1.4, HDI, |, 1.6, 16V, FAP

  • Timing position: the crankshaft or camshaft is set and locked during this job
  • Special tools named: locking pin

🔧 Engine codes this applies to

DV4TED(8HS)DV6TED4(9HZ)

📋 Procedure

  1. Vehicles without air conditioning:
  2. Vehicles with air conditioning:
  3. Removal:
  4. Remove the front right wheel
  5. Remove the engine lower cover
DV4TED(8HS)? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Remove the front splash guard
  2. Turn the tensioner pulley clockwise
  3. Use a wrench
  4. Lock the tensioner; use a locking pin
  5. Remove the drive belt

Other CITROEN procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.