Separating cover and padding, double cab — AUDI

🧭 Before you start

Fits: platform codes SF, SG

📋 Procedure

1. Remove seat padding .
2. Remove seat padding from vehicle.
3. Detach profile sections from mountings on underside of seat padding.
4. Remove cover (1) and padding (2) from rear seat frame (3).
5. Remove backrest .

6. Press button of respective left head restraint guide (4).
7. Pull out respective head restraint (6).
8. Press down padding in the rear area of the head reastraint guides.
9. Press catches.
10. Pull head restraint guides (4) and (5) out of backrest.
11. Detach profile sections (8) from mountings (7).
12. Remove cover (3) and padding (2) from backrest frame (1).
13. Installation is carried out in reverse order.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing metering pump V54 of type "1" – Audi
• Checking of electrical components and connections – Audi Q7
• Removing and installing convenience system central control unit 2J773
• Removing and installing dash panel cover (top) on driver side (knee bolster)
• Removing and installing padding for centre armrest – Audi Q7