Replacing dipped beam bulbs: Audi A6 C5
Step-by-step replacing dipped beam bulbs for the Audi A6 C5: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A6 C5 (4B)
📋 Procedure
- Detach cover (arrow) at power-assisted steering reservoir.
- Detach cover (arrow) on right of engine compartment.
- Screw out bolts (arrows).
- Remove air ducts (1) and (2).
- Release spring clips (arrows) and detach cover from headlight housing.
- Unplug connectors (2) at dipped beam bulb.
- Disengage spring clip (1) and take bulb out of housing.
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure bulb with spring clip.
- Secure housing cover with spring clips.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing outer tapered roller bearing, Crafter 4MOTION with Achleitner four-wheel drive
- Removing and installing flange shafts on front final drive
- Removing and installing rear propshaft, Crafter 4MOTION with Achleitner four-wheel drive
- Renewing front centre bearing of propshaft
- Installing gearbox, Crafter 4MOTION with Achleitner four-wheel drive
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.