Renewing fog light bulb L22/L23 - Audi S6/Audi RS 6: Audi A6 C6

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

Don't miss

• Do not flash the headlights.
• Insert new bulb in housing; do not touch glass part of bulb with bare hands.

📋 Procedure

1. ⚠ High voltage! Danger to life!Ensure that any part of the gas discharge headlights marked with yellow high-voltage warning symbols are de-energised when you are working on them.Switch off ignition and all electrical equipment and remove ignition key.Do not flash the headlights. — Turn light switch to position "“0”".
2. Switch off ignition and all electrical equipment and remove ignition key.
3. Do not flash the headlights.
4. Remove air cleaner housing .
5. Remove air cleaner housing .

6. Remove headlight .
7. Release retaining tabs (arrows) and detach housing cover from headlight housing.
8. Unplug electrical connector (1) at bulb.
9. Disengage retaining clip (2) and take bulb (3) out of housing.
10. Insert new bulb in housing; do not touch glass part of bulb with bare hands.
11. Secure bulb with retaining clip.
12. Plug in connectors and close housing cover.
13. Install headlight .
14. Adjust fog lights .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rubber strap for convertible roof headliner
• Removing and installing mirror base with adapter plate
• Removing and installing brake pads, front brakes (16" FN3)
• Removing and installing backrest cover and padding (front bucket seat)
• Removing and installing condenser, vehicles with 6-cyl. engine