Renewing fog light bulb - Audi A4 — AUDI

🧭 Before you start

Fits: Audi A4 B6/B7 (8E)

Don't miss

• Do not touch glass bulb with bare hands.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Remove front bumper cover 63.
4. On vehicles with auxiliary heater, unscrew bolts (arrows) for exhaust pipe of auxiliary/supplementary heater at noise insulation.
5. Unfasten bolts/quick-release fasteners (1) and (2) and detach noise insulation (front).

6. Unplug electrical connector (2).
7. Turn bulb (1) anti-clockwise (arrow) and pull out of fog light housing.
8. Do not touch glass bulb with bare hands.
9. Secure bulb by turning in clockwise direction.
10. Install front bumper cover 63.
11. Adjust fog lights 803.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing coolant pump – Audi A1 · 6 torque figures
• Removing timing chain (left-side) from camshafts – Audi 4.2 · 6 torque figures
• Crankshaft - exploded view of components · 8 torque figures
• Removing and installing power steering pump, vehicles with 6-cyl. 2.7 l petrol engine · 5 torque figures
• Removing and installing E-box on left side of engine compartment · 7 torque figures