Removing and installing fog light bulb L22/L23: Audi A8 D4

🧭 Before you start

Fits: Audi A8 D4 (4H, 2010–2017)

📋 Procedure

1. Remove headlight housing .
2. Vehicles up to model year 2013: Release housing cover (1) anti-clockwise (arrow) and detach from headlight housing.
3. Vehicles from model year 2014 onwards: If fitted, remove bolts (2, 3).
4. Release retaining tabs (arrows) and detach housing cover (1) from headlight housing.
5. Turn bulb holder (1) anti-clockwise (arrow) and pull it out of housing.

6. Pull bulb (2) out of bulb holder.
7. Insert new bulb in bulb holder, taking care not to touch glass part of bulb with bare hands.
8. Turn bulb holder (2) in clockwise direction (arrow).
9. Vehicles up to model year 2013: Close housing cover (1) by turning clockwise.
10. Vehicles from model year 2014 onwards: Close housing cover and, if fitted, tighten bolts.
11. Install headlight housing .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing heater unit -B4W/D4W-
• Adjusting the brake pressure regulator
• Removing and installing injector – Audi 2.8 TDI AUH/BCQ
• Removing, installing and adjusting cable for regulating valve
• Removing and installing adjusting unit for fresh air/recirculated air, air flow flap control motor V425