Renewing bulb for additional main beam/cornering light M67/M68, L148/L149 — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

Don't miss

• Fit new bulb (1) in bulb holder and attach to electrical connector (3); lug (2) on bulb must make contact with stop (4) of bulb holder.
• Insert new bulb in housing; do not touch glass part of bulb with bare hands.

📋 Procedure

1. Remove power steering reservoir .
2. Remove air cleaner housing .
3. Remove air cleaner housing .
4. Remove air cleaner housing .
5. Remove air cleaner housing .

6. Remove air cleaner housing .
7. Remove air cleaner housing .
8. Remove air cleaner housing .
9. Release retaining tabs (arrows) and detach housing cover from headlight housing.
10. Turn bulb holder (1) anti-clockwise (arrow) and pull it out of housing.
11. Pull main beam bulb (1) out of bulb holder (2).
12. Fit new bulb (1) in bulb holder and attach to electrical connector (3); lug (2) on bulb must make contact with stop (4) of bulb holder.
13. Insert new bulb in housing; do not touch glass part of bulb with bare hands.
14. Close housing cover.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing coolant pipe (rear) – Audi A8 D3
• Removing and installing unit injector · 1 torque figures
• Removing and installing ceramic glow plugs – Audi · 2 torque figures
• Renewing timing chain cover (bottom)
• Removing and installing Bowden cable – Audi TT Mk2