Removing and installing washer jet for camera for night vision system R212 — AUDI

🧭 Before you start

Fits: Audi A8 D4 (4H, 2010–2017)

Don't miss

• Disregard (item 2).

📋 Procedure

1. Remove horn (left-side) .
2. If fitted, unclip cover (1) (left-side) and detach (arrows).
3. Remove bolts (arrows).
4. Detach air duct (1) (left-side). [Note: Disregard (item 2).]
5. Remove bolts (arrows).

6. Release retaining clip (3) and pull off washer fluid hose (2).
7. Take camera for night vision system R212(item 1) out of mounting at radiator grille towards left.
8. Unplug electrical connector (4).
9. Remove bolts (arrows).
10. Detach washer jet (2) with washer fluid hose.
11. Release retaining clip (3) and pull washer fluid hose (1) off washer jet.
12. Install camera for night vision system R212Communication91Night vision system; Removing and installing camera for night vision system.
13. Install horn .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rotary knob for operating and display unit for camping equipment E153
• Removing and installing burner head
• Removing and installing right sliding door roller blind
• Checking vacuum hose to regulating flap potentiometer G584
• Checking vacuum hose to vacuum unit on turbocharger