Removing and installing TV tuner: Audi Q3

🧭 Before you start

Fits: Audi Q3 (8U, 2011–2018); platform code 84

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Remove cover on left in luggage compartment and remove luggage compartment floor covering.
3. Remove nuts (2) on bracket (1).
4. Swivel bracket (1) into luggage compartment until front side of radioR and TV tuner R78 are accessible.
5. Release and unplug all connectors on radioR and TV tuner R78.

6. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
7. Bring bracket (1) into luggage compartment.
8. Remove bolts (2) on bracket (1).
9. Remove TV tuner R78(1) from bracket.
10. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing dash panel insert with control unit in dash panel insert J285
• Removing and installing windscreen washer fluid level sender
• Removing and installing washer jet for camera for night vision system R212
• Removing and installing gas discharge bulb L13/L14 - vehicles up to model year 2014
• Removing and installing headlight range control motor V48/V49 - LED headlights from model year 2015 onwards