Removing and installing seat ("High") - centre seat in 2nd row — AUDI

🧭 Before you start

Fits: Audi Q7 (4M, 2015–)

Don't miss

• Other (items) can be disregarded.

📋 Procedure

1. Move front seats as far forwards as they will go.
2. Slide seat towards rear.
3. Remove hinge trim (tunnel side) .
4. Unplug electrical connector (5) for belt switch for seat row 2, middle F391 and move wiring clear. [Note: Other (items) can be disregarded.]
5. Remove bolts (arrows).

6. Fold outer seat backrests and outer seats forwards.
7. Slide seat towards front.
8. Fold backrest down.
9. Remove seat rail trim on both sides .
10. Remove bolts (arrows).
11. Before lifting out rear seat, attach protectorVAS 871 001 as shown in illustration to protect sill panel trim.
12. Lift seat out of vehicle with the assistance of a second mechanic.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing coupling station in seat box at front on left · 1 torque figures
• Removing and installing dash panel middle trim, Multivan
• Removing and installing seat belt for outer seat in 3rd row, Transporter
• Removing and installing trim on front passenger side, Transporter
• Removing and installing right dash panel trim, Multivan