Removing and installing seat belt for outer seat in 3rd row, Transporter — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T5 (7J), VW Transporter T6 (7E), VW Transporter T6 (7F)

Don't miss

• When installing, turn belt anchor bracket (1) forwards onto stop (arrow).

📋 Procedure

1. Remove seats from 2nd and 3rd rows.
2. Remove upper C-pillar trim (dependent on equipment level) .
3. Remove upper D-pillar trim (dependent on equipment level) .
4. Remove moulded headliner in passenger compartment (dependent on equipment level) .
5. Use a small screwdriver to lever off cap (7) from bolt (8).

6. Unscrew bolt (8).
7. Remove belt end fitting (9) and spacer bush (10).
8. Remove side panel trim .
9. Unclip cover (2).
10. Unscrew bolt (4).
11. Remove belt guide fitting (3) from bracket (1).
12. Unclip cover (6).
13. Unscrew bolt (5) and remove bracket (1) of belt guide fitting. [Note: When installing, turn belt anchor bracket (1) forwards onto stop (arrow).]
14. Unscrew bolt (11) and remove belt inertia reel (12) from side board.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures