Removing and installing seat cushion cover and padding (standard seat) — AUDI

🧭 Before you start

Fits: Audi A4 B6/B7 (8E)

Don't miss

• Always renew damaged plastic clips (5).

📋 Procedure

1. Remove seat: vehicles up to 10.2004 ; vehicles from 11.2004 onwards .
2. Remove backrest: vehicles up to 10.2004 ; vehicles from 11.2004 onwards .
3. Unclip connector for seat heating (2) from retainer.
4. Use screwdriver to prise out peripheral plastic strips (3).
5. Fold back cover (1).

6. Use screwdriver to prise fastening strips (4) out of plastic clips (5).
7. Lift off cover (1).
8. Detach padding (6).
9. Always renew damaged plastic clips (5).
10. On vehicles with ISOFIX retainer and new cover fabric (1), cut slots in fabric cover at location of ISOFIX retainer .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking electrolyte level
• Servicing drive shaft with triple roller joint
• Removing and installing power-assisted steering box for LHD vehicles with V6 TDI engine
• Servicing power-assisted steering
• Replacing crown wheel for electric folding table