Removing and installing seat bench cover and padding: Audi A4 B9

🧭 Before you start

Fits: Audi A4 B9 (8W, 2015–)

📋 Procedure

1. Remove seat bench .
2. Detach clips (1) using removal lever80-200.
3. Using a screwdriver, prise fastening strip (3) of cover off moulded section all along seat frame.
4. Disengage piping (2) of cover (rear section) from seat frame.
5. Disengage piping (1) on seat frame.

6. Use screwdriver to lever fastening strip (4) out of moulded section.
7. Detach clips (2) using removal lever80-200.
8. Unfasten velcro strips (3).
9. Remove cover and padding from seat frame.
10. First engage piping at rear of seat frame, and then pull cover so it is taut.
11. Fold fastening strip (1) around inwards (arrow A) by 180°.
12. Engage fastening strip in groove in moulded section (arrow B).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rear window wiper blades, vehicles without joint-free rear window wipers
• Removing and installing spray jet pop-up cylinders, vehicles as of 2010
• Removing and installing headlights, headlights with H7/H15 bulb, as of model year 2010
• Removing and installing ignition/starter switch, vehicles as of 09.2009
• Removing and installing glove compartment, Multivan