Removing and installing radiator fan 2V177 (left-side) — AUDI

🧭 Before you start

Fits: Audi A6 C5 (4B)

Don't miss

• All cable ties which are released or cut open when removing must be refitted in the same position when installing.
• Reinstall all cable ties in the same locations when assembling.

🔧 Engine codes this applies to

📐 4 workshop diagrams for BCY

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Pull lock carrier forwards . [Note: All cable ties which are released or cut open when removing must be refitted in the same position when installing.]
2. Take electrical connector (arrow) out of bracket and unplug it.
3. Unplug electrical connector (arrow).
4. Move wire to electric fan clear.
5. Remove bolt (1).

6. Turn electrical fan in (direction of the arrow) and detach. [Note: Reinstall all cable ties in the same locations when assembling.]
7. Install lock carrier with attachments 50.
8. Install front bumper 63.
9. Install air cleaner housing .
10. Adjust headlights 94.

Other AUDI procedures

• Removing and installing radiator fan V7 (right side) – Audi
• Removing and installing exhaust gas temperature sender
• Removing and installing front exhaust pipe (right-side)
• Checking brake light switch -F and brake pedal switch -F47
• Checking throttle valve drive angle senders 1 and 2 -G187 and -G188
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures