Removing and installing luggage compartment pan — AUDI

🧭 Before you start

Fits: platform code 42

📋 Procedure

1. Remove bumper trim 50.
2. Remove headlight/wheel housing liner trim (left and right) 50.
3. Remove cowl panel trim 50.
4. Remove 12 V socket with luggage compartment light Electrical system96.
5. Remove bolts (1 and 2).

6. Take out foam insert for tool kit and tool kit.
7. Pull luggage compartment pan out of retainers at corners (arrows).
8. Pull luggage compartment pan upwards until two cable connectors for manual release inside luggage compartment are accessible.
9. Open lid of cable connector (arrow A).
10. Take cable sleeve out of guide (arrow B) and disengage cable nipple from lug (arrow C).
11. Repeat procedure for 2nd cable.
12. Lift out luggage compartment pan.
13. Press luggage compartment pan into retainers at corners.
14. Pull gently on luggage compartment pan to check whether retainer (2) is properly engaged at pin (1).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing headlights, headlights with H4 bulb
• Removing and installing switches in centre of dash panel on right, Multivan
• Removing and installing airbag unit on front passenger side (Multivan)
• Removing and installing moulded headliner for passenger compartment
• Removing and installing seat belt